Three-Side Tilt-Bed Semi-Trailer 1.8 Tones
| LOAD CAPACITY (KG) | 1 800 |
|---|---|
| LENGTH (mm) | 3 200 |
| WIDTH (mm) | 1 550 |
| HEIGHT(mm) | 1 400 |
| WEIGHT(kg) | 520 |
| VOLUME(m3 ) |
1,3 |
| REAR WHEEL SPACING (MM) | 1 200 - 1 500 |
Further details about the product
A single-axle tractor tilt-bed semi-trailer SP 3 - 1.8 tones
A single-axle tractor tilt-bed semi-trailer SP 3 - 1.8 tones is designed for the transport of various materials on roads and in agriculture (both bulk and unit materials). It is equipped with a hydraulic-controlled tilting device of the loading area; both to the sides and to the rear. Therefore, it is ideal for the transport of soil sand and other materials. The over-running type brake in the drawbar of the semi-trailer ensures safe and flawless run of the semi-trailer on a rough and rugged surface. The loading area can be extended with a superstructure with a height of 42 cm.
Front Loader
| BUCKET SIZE (MM) | 1 270 |
|---|---|
| MAXIMUM LIFT HEIGHT (MM) | 2 490 |
| RANGE AT MAXIMUM HEIGHT (MM) | 406 |
| RANGE WITH THE BUCKET ON THE GROUND (MM) | 1 500 |
| DEPTH RANGE (MM) | 150 |
| LOAD CAPACITY TO FULL HEIGHT (KG) | 397 |
| BREAKOUT FORCE (kN) | 10 |
| BUCKET CONTROL | hydraulický dvojválec |
| LIFTING TIME (SEC) | 6,5 |
| START-UP TIME (SEC) | 5,0 |
| BUCKET TIPPING TIME (SEC) | 5,0 |
| BUCKET CLOSING TIME (SEC) | 4,0 |
Further details about the product
Front Loader
The loader is designed for light work in agriculture, landscaping and snow removal, for the models JINMA 204E, 244E, 304E and 354E.
Pallet Forks for Rear Mount
| LOAD CAPACITY (KG) | 350 |
|---|---|
| WIDTH (MM) | 900 |
| HEIGHT (MM) | 1 800 |
| LIFT HEIGHT (MM) | 2 200 |
| WEIGHT (KG) | 520 |
| TRACTOR POWER (HP) | 20-40 |
Further details about the product
Pallet Forks for Rear Mount
Pallet forks with load capacity of 350 kg for the rear mount of a compact tractor.
Tipping Tractor Bucket
| LOAD CAPACITY (KG) | 1 400 | 1 600 | 1 800 |
|---|---|---|---|
| WIDTH (MM) | 1 800 | 2 000 | 2 200 |
| HEIGHT(mm) | 490 | 490 | 490 |
| LENGHT(mm) | 810 | 810 | 810 |
| WEIGHT(kg) | 252 | 281 | 309 |
| INCLINATION (°) | 190 | 190 | 190 |
Further details about the product
Tipping Tractor Bucket
The tipping tractor bucket is great help for the transport of various loads, such as wood, bulk materials, soil, grass, hay, snow and others. The bucket is made in three sizes; 180, 200 and 220 cm. It is intended to be fixed behind tractors with a power of 20-80 HP.
Rotary Tiller ARK
| Typ |
AKR 120 |
AKR 140 |
|---|---|---|
| LENGTH (CM) |
87 | 87 |
| WIDTH (PS) |
135 | 150 |
| HEIGHT (CM) |
77 | 77 |
| WEIGHT (KG) | 164 | 184 |
| WORKING WIDTH (CM) | 115 | 136 |
| WORKING DEPTH (CM) | 15 | 15 |
Further details about the product
Rotary Tiller ARK
The rotary tiller is designed to cultivate soil gently. Its design is optimum for soil processing before subsequent use of a seed drill. The main components are knives located on a rotor, which is driven through an cardan (articulated) shaft through a tiller reducer.
Combinator PK
| Typ |
PK 140 |
PK 170 |
|---|---|---|
| LENGTH (CM) |
130 | 130 |
| WIDTH (PS) |
155 | 180 |
| HEIGHT (CM) |
78 | 78 |
| WEIGHT (KG) | 80 | 100 |
| WORKING WIDTH (CM) | 140 | 170 |
| WORKING DEPTH (CM) | adjustable to 15 | adjustable to 15 |
Further details about the product
Combinator PK
It is designed for the preparation of soil after plowing, before seeding and planting, for surface soil loosening, clod crushing and ground leveling.
Earth Auger
| TYPE |
APV 175 |
|---|---|
| MAX. DEPTH (CM) |
70 |
| REQUIRED SPEED (RPM) |
540 |
| NOMINAL SPEED (RPM) |
121 |
| WEIGHT (KG) | 167 |
| WORKING WIDTH (CM) | 15, 20, 30, 40 |
Further details about the product
Earth Auger APV-175
The earth auger APV-175 is designed to bore pits in cohesive soles without large stones. Thus it facilitates the work with tree or bush planting, with setting of fence posts and similar work. The auger is driven from a tractor by a cardan (articulated) shaft. The depth of bored pits can be set using adjustable supports on the gearbox. The machine can be mounted to any type of compact tractors fitted with the three-point mount Kat. I.
Rotary Mower
| TYPE |
Mini |
|---|---|
| CUTTING WIDTH (CM) |
125 |
| REQUIRED SPEED (RPM) |
540 |
| DRUM WORKING SPEED (RPM) |
2 070 |
| WEIGHT (KG) | 150 |
| REQUIRED POWER (HP) | 17 |
Further details about the product
Rotary Mower Wirax
The rotary mower Wirax with a width of 1250 mm is fit for each type of compact tractors.
Tedder and Rake SP4 066
| TYPE |
Mini |
|---|---|
| WORKING WIDTH (CM) |
235 |
| REQUIRED SPEED (RPM) |
540 |
| WORKING SPEED (KPH) |
9-11 |
| WEIGHT (KG) | 230 |
| REQUIRED POWER (HP) | 20-50 |
Further details about the product
Tedder and Rake
The machine is designed to spread swath uniformly and to rack forage in a wilted and dry state to continuous rows in all production areas on lots with a flat or slightly undulating surface without greater occurrence of stones. It can be mounted to the tractors with a power of 15 - 40 kW. The slope capacity is dependent on the capacity of the set. The machine is not suitable for overgrown or overmature stands.
Write to us or call
+420 388 302 130
STS Prachatice, a.s.
Těšovice 62
384 21 Husinec
CRN: 608 26 983
VAT Reg. No.: CZ60826983
GPS:
49°2'41.26"N, 14°1'19.433"E
PHONE: +420 388 302 130
FAX: +420 388 312 042
E-MAIL: info@stsprachatice.cz