STS 4T_en
LOAD CAPACITY (kg) | 4 000 |
---|---|
WEIGHT(kg) | 900 |
TOTAL LENGHT(mm) | 4 690 |
LOADING AREA LENGTH (mm) | 3 000 |
TOTAL WIDTH WITH STANDARD WHEELS (mm) | 2 000 |
STANDARD WHEELS | 400/60x15,5 |
HEADWAY (mm) | 475 |
HYDRAULICALLY-CONTROLLABLE DRAWBAR | NO |
WOOD FORWARDER DRAWING | HERE |
Prospekt | HERE |
Further details about the product
Wood Forwarder STS Prachatice 4T
A Czech-made wood forwarder with a load capacity of four tons and a backbone frame, a boogie axle, fixed drawbar and a possible of stanchion movement. Approved with air-brakes on one axle or without brakes. Fit for approaching brushwood.
STS 6T_en
LOAD CAPACITY (kg) | 6 000 |
---|---|
WEIGHT(kg) | 1 576 |
TOTAL LENGHT(mm) | 5 993 |
LOADING AREA LENGTH (mm) | 4 070 |
TOTAL WIDTH WITH STANDARD WHEELS (mm) | 2 000 |
STANDARD WHEELS | 400/60x15,5 |
HEADWAY (mm) | 417 |
HYDRAULICALLY-CONTROLLABLE DRAWBAR | YES |
WOOD FORWARDER DRAWING | HERE |
Brochure | HERE |
Further details about the product
Wood Forwarder STS Prachatice 6T
A Czech-made wood forwarder with a load capacity of six tons and a backbone frame, with a boogie axle, hydraulic-tilted drawbar, air-brakes on one axle and a possibility of stanchion movement. Fit for approaching brushwood.
STS 7T_en
LOAD CAPACITY (kg) | 7 000 |
---|---|
WEIGHT(kg) | 2 055 |
TOTAL LENGHT(mm) | 6 470 |
LOADING AREA LENGTH (mm) | 4 250 |
TOTAL WIDTH WITH STANDARD WHEELS (mm) | 2 020 |
STANDARD WHEELS | 400/50x22,5 |
HEADWAY (mm) | 530 |
HYDRAULICALLY-CONTROLLABLE DRAWBAR | NO |
WOOD FORWARDER DRAWING | HERE |
Prospect | HERE |
Further details about the product
Wood Forwarder STS Prachatice 7T
A Czech-made wood forwarding trailer with a load capacity of seven tons, with a backbone frame, boogie axle, fixed drawbar, air-brakes on all wheels and the possibility of stanchion movement. Fit for approaching brushwood.
STS 10T_en
LOAD CAPACITY (kg) | 10 000 |
---|---|
WEIGHT(kg) | 2 355 |
TOTAL LENGHT(mm) | 6 470 - 7 270 |
LOADING AREA LENGTH (mm) | 4 250 - 5 050 |
TOTAL WIDTH WITH STANDARD WHEELS (mm) | 2 020 |
STANDARD WHEELS | 400/50x22,5 |
HEADWAY (mm) | 530 |
HYDRAULICALLY-CONTROLLABLE DRAWBAR | YES |
WOOD FORWARDER DRAWING | HERE |
Prospect | HERE |
Further details about the product
Wood Forwarder STS Prachatice 10T
A Czech-made wood forwarding trailer with a load capacity of ten tons, with a backbone frame, a boogie axle, hydraulic tilting drawbar with two pistons, loading area extension, air-brakes on each wheel and the possibility of stanchion movement. Fit for approaching brushwood.
Wood Forwarder Kinetic 8x8
LOAD CAPACITY (kg) | 3 000 |
---|---|
WEIGHT(kg) | 1 790 |
TOTAL LENGTH (mm) | 4 946 - 5 446 |
LOADING AREA LENGTH (mm) | 2 775 - 3 275 |
TOTAL WIDTH WITH STANDARD WHEELS (mm) | 1 600 |
STANDARD WHEELS | 300/65R12 |
HEIGHT WITH A BOOM (mm) | 2 355 |
GEAR UNIT |
4 forward,1 reverse |
BOOM RANGE (m) | 4,7 |
LIFT AT 3M (kg) | 550 |
LIFT AT FULL EJECT (kg) | 370 |
Prospect | HERE |
Further details about the product
Automatic Wood Forwarder Country Kinetic 8x8
A mobile machine with a large throughput, fit for a rugged terrain, friendly to the forest bed, powerful, featuring low consumption and easy to use.
Wood Forwarder for a Passenger Vehicle
LOAD CAPACITY (KG) | 2 800 |
---|---|
WEIGHT (kg) | 700 |
TOTAL LENGTH (mm) | 5 250 |
LOADING AREA LENGTH (mm) | 3 200 |
TOTAL WIDTH WITH STANDARD WHEELS (mm) | 1 890 |
STANDARD WHEELS | 185R14C |
HEIGHT WITH A BOOM (mm) | 1 800 |
MAXIMUM SPEED (km/h) | 80 |
BRAKES | over-running type |
Prospect | HERE |
Further details about the product
Wood Forwarder for a Passenger Vehicle
The wood forwarding trailer for a passenger vehicle with a total load capacity of 3.5 tons and with a transport speed of 80 kph will be great help for those who transport firewood or who need to transport wood at long distance. The trailer is approved for use on roads and it includes a boom (loader) made by the Estonian manufacturer Country, model 470, and the drive unit Honda.
Kesla 316 A_en
MAXIMUM RANGE (M) | 7,20 |
---|---|
LIFT AT 4M (KG) | 1 540 |
LIFT AT FULL EJECT (KG) | 830 |
BOOM ROTATION ANGLE (o) | 380 |
BOOM TORQUE (KNM) | 19,5 |
GRAB-LOADER AREA (m2) | 0,24 |
MAXIMUM OPENING (cm) | 131,5 |
WORKING PRESSURE (bar) | 210 |
RECOMMENDED PUMP CAPACITY (l/min) | 50-80 |
TOTAL WEIGHT (kg) | 1 445 |
Further details about the product
Hydraulic Boom Kesla 316A
Kesla provides a wide range of hydraulic loaders for agricultural and forestry purposes, specially designed for timber harvesting. The hydraulic loaders (booms) Kesla are top professional hydraulic loaders thanks to their lifting power and torque. The cranes Kesla can be placed both on the wood forwarder, and to the three-point suspension of the tractor.
Kesla 305T_en
MAXIMUM RANGE (M) | 8,50 |
---|---|
LIFT AT 4M (KG) | 1 150 |
LIFT AT FULL EJECT (KG) | 490 |
BOOM ROTATION ANGLE (o) | 380 |
BOOM TORQUE (KNM) | 16,0 |
GRAB-LOADER AREA (m2) | 0,24 |
MAXIMUM OPENING (cm) | 131,5 |
WORKING PRESSURE (bar) | 190 |
RECOMMENDED PUMP CAPACITY (l/min) | 50-80 |
TOTAL WEIGHT (kg) | 1 370 |
Further details about the product
Hydraulic Boom Kesla 305T
Kesla provides a wide range of hydraulic loaders for agricultural and forestry purposes, specially designed for timber harvesting. The hydraulic loaders (booms) Kesla are top professional hydraulic loaders thanks to their lifting power and torque. The cranes Kesla can be placed both on the wood forwarder, and to the three-point suspension of the tractor.
Kesla 305_en
MAXIMUM RANGE (M) | 6,90 |
---|---|
LIFT AT 4M (KG) | 1 290 |
LIFT AT FULL EJECT (KG) | 720 |
BOOM ROTATION ANGLE (o) | 380 |
BOOM TORQUE (KNM) | 160 |
GRAB-LOADER AREA (m2) | 0,24 |
MAXIMUM OPENING (cm) | 131,5 |
WORKING PRESSURE (bar) | 190 |
RECOMMENDED PUMP CAPACITY (l/min) | 50-80 |
TOTAL WEIGHT (kg) | 1 260 |
Further details about the product
Hydraulic Boom Kesla 305
Kesla provides a wide range of hydraulic loaders for agricultural and forestry purposes, specially designed for timber harvesting. The hydraulic loaders (booms) Kesla are top professional hydraulic loaders thanks to their lifting power and torque. The cranes Kesla can be placed both on the wood forwarder, and to the three-point suspension of the tractor.
Kesla 304T_en
MAXIMUM RANGE (M) | 8,50 |
---|---|
LIFT AT 4M (KG) | 1 000 |
LIFT AT FULL EJECT (KG) | 430 |
BOOM ROTATION ANGLE (o) | 380 |
BOOM TORQUE (KNM) | 13,5 |
GRAB-LOADER AREA (m2) | 0,24 |
MAXIMUM OPENING (cm) | 132 |
WORKING PRESSURE (bar) | 190 |
RECOMMENDED PUMP CAPACITY (l/min) | 40-70 |
TOTAL WEIGHT (kg) | 1 070 |
Further details about the product
Hydraulic Boom Kesla 304T
Kesla provides a wide range of hydraulic loaders for agricultural and forestry purposes, specially designed for timber harvesting. The hydraulic loaders (booms) Kesla are top professional hydraulic loaders thanks to their lifting power and torque. The cranes Kesla can be placed both on the wood forwarder, and to the three-point suspension of the tractor.
Kesla 304_en
MAXIMUM RANGE (M) | 6,90 |
---|---|
LIFT AT 4M (KG) | 1 100 |
LIFT AT FULL EJECT (KG) | 620 |
BOOM ROTATION ANGLE (o) | 380 |
BOOM TORQUE (KNM) | 13,5 |
GRAB-LOADER AREA (m2) | 0,24 |
MAXIMUM OPENING (cm) | 132 |
WORKING PRESSURE (bar) | 190 |
RECOMMENDED PUMP CAPACITY (l/min) | 40-70 |
TOTAL WEIGHT (kg) | 975 |
Further details about the product
Hydraulic Boom Kesla 304
Kesla provides a wide range of hydraulic loaders for agricultural and forestry purposes, specially designed for timber harvesting. The hydraulic loaders (booms) Kesla are top professional hydraulic loaders thanks to their lifting power and torque. The cranes Kesla can be placed both on the wood forwarder, and to the three-point suspension of the tractor.
Kesla 303_en
MAXIMUM RANGE (M) | 6,80 |
---|---|
LIFT AT 4M (KG) | 795 |
LIFT AT FULL EJECT (KG) | 410 |
BOOM ROTATION ANGLE (o) | 380 |
BOOM TORQUE (KNM) | 13,5 |
GRAB-LOADER AREA (m2) | 0,18 |
MAXIMUM OPENING (cm) | 124 |
WORKING PRESSURE (bar) | 190 |
RECOMMENDED PUMP CAPACITY (l/min) | 30-50 |
TOTAL WEIGHT (kg) | 885 |
Further details about the product
Hydraulic Boom Kesla 303
Kesla provides a wide range of hydraulic loaders for agricultural and forestry purposes, specially designed for timber harvesting. The hydraulic loaders (booms) Kesla are top professional hydraulic loaders thanks to their lifting power and torque. The cranes Kesla can be placed both on the wood forwarder, and to the three-point suspension of the tractor.
Kesla 211_en
MAXIMUM RANGE (M) | 5,0 |
---|---|
LIFT AT 4M (KG) | 525 |
LIFT AT FULL EJECT (KG) | 415 |
BOOM ROTATION ANGLE (o) | 400 |
BOOM TORQUE (KNM) | 4,9 |
GRAB-LOADER AREA (m2) | 0,18 |
MAXIMUM OPENING (cm) | 124 |
WORKING PRESSURE (bar) | 175 |
RECOMMENDED PUMP CAPACITY (l/min) | 24-40 |
TOTAL WEIGHT (kg) | 810 |
Further details about the product
Hydraulic Boom Kesla 211
Kesla provides a wide range of hydraulic loaders for agricultural and forestry purposes, specially designed for timber harvesting. The hydraulic loaders (booms) Kesla are top professional hydraulic loaders thanks to their lifting power and torque. The cranes Kesla can be placed both on the wood forwarder, and to the three-point suspension of the tractor.
Kesla 203T_en
MAXIMUM RANGE (M) | 6,70 |
---|---|
LIFT AT 4M (KG) | 690 |
LIFT AT FULL EJECT (KG) | 405 |
BOOM ROTATION ANGLE (o) | 380 |
BOOM TORQUE (KNM) | 8,0 |
GRAB-LOADER AREA (m2) | 0,18 |
MAXIMUM OPENING (cm) | 124 |
WORKING PRESSURE (bar) | 175 |
RECOMMENDED PUMP CAPACITY (l/min) | 30-50 |
TOTAL WEIGHT (kg) | 1 030 |
Further details about the product
Hydraulic Boom Kesla 203T
Kesla provides a wide range of hydraulic loaders for agricultural and forestry purposes, specially designed for timber harvesting. The hydraulic loaders (booms) Kesla are top professional hydraulic loaders thanks to their lifting power and torque. The cranes Kesla can be placed both on the wood forwarder, and to the three-point suspension of the tractor.
Kesla 203_en
MAXIMUM RANGE (M) | 5,30 |
---|---|
LIFT AT 4M (KG) | 780 |
LIFT AT FULL EJECT (KG) | 600 |
BOOM ROTATION ANGLE (o) | 380 |
BOOM TORQUE (KNM) | 8 |
GRAB-LOADER AREA (m2) | 0,18 |
MAXIMUM OPENING (cm) | 124 |
WORKING PRESSURE (bar) | 175 |
RECOMMENDED PUMP CAPACITY (l/min) | 30-50 |
TOTAL WEIGHT (kg) | 950 |
Further details about the product
Hydraulic Boom Kesla 203
Kesla provides a wide range of hydraulic loaders for agricultural and forestry purposes, specially designed for timber harvesting. The hydraulic loaders (booms) Kesla are top professional hydraulic loaders thanks to their lifting power and torque. The cranes Kesla can be placed both on the wood forwarder, and to the three-point suspension of the tractor.
Kesla 204T_en
MAXIMUM RANGE (M) | 6,80 |
---|---|
LIFT AT 4M (KG) | 795 |
LIFT AT FULL EJECT (KG) | 410 |
BOOM ROTATION ANGLE (o) | 380 |
BOOM TORQUE (KNM) | 8,0 |
GRAB-LOADER AREA (m2) | 0,18 |
MAXIMUM OPENING (cm) | 124 |
WORKING PRESSURE (bar) | 190 |
RECOMMENDED PUMP CAPACITY (l/min) | 30-60 |
TOTAL WEIGHT (kg) | 1 095 |
Further details about the product
Hydraulic Boom Kesla 204T
Kesla provides a wide range of hydraulic loaders for agricultural and forestry purposes, specially designed for timber harvesting. The hydraulic loaders (booms) Kesla are top professional hydraulic loaders thanks to their lifting power and torque. The cranes Kesla can be placed both on the wood forwarder, and to the three-point suspension of the tractor.
Kesla 202T_en
MAXIMUM RANGE (M) | 6,15 |
---|---|
LIFT AT 4M (KG) | 425 |
LIFT AT FULL EJECT (KG) | 275 |
BOOM ROTATION ANGLE (o) | 420 |
BOOM TORQUE (KNM) | 8 |
GRAB-LOADER AREA (m2) | 0,18 |
MAXIMUM OPENING (cm) | 124 |
WORKING PRESSURE (bar) | 175 |
RECOMMENDED PUMP CAPACITY (l/min) | 30-50 |
TOTAL WEIGHT (kg) | 900 |
Further details about the product
Hydraulic Boom Kesla 202T
Kesla provides a wide range of hydraulic loaders for agricultural and forestry purposes, specially designed for timber harvesting. The hydraulic loaders (booms) Kesla are top professional hydraulic loaders thanks to their lifting power and torque. The cranes Kesla can be placed both on the wood forwarder, and to the three-point suspension of the tractor.
Kesla 202_en
MAXIMUM RANGE (M) | 5,0 |
---|---|
LIFT AT 4M (KG) | 525 |
LIFT AT FULL EJECT (KG) | 415 |
BOOM ROTATION ANGLE (o) | 420 |
BOOM TORQUE (KNM) | 7,1 |
GRAB-LOADER AREA (m2) | 0,18 |
MAXIMUM OPENING (cm) | 124 |
WORKING PRESSURE (bar) | 175 |
RECOMMENDED PUMP CAPACITY (l/min) | 24-40 |
TOTAL WEIGHT (kg) | 835 |
Further details about the product
Hydraulic Boom Kesla 202
Kesla provides a wide range of hydraulic loaders for agricultural and forestry purposes, specially designed for timber harvesting. The hydraulic loaders (booms) Kesla are top professional hydraulic loaders thanks to their lifting power and torque. The cranes Kesla can be placed both on the wood forwarder, and to the three-point suspension of the tractor.
Tractor Forestry Processor Kesla LF40
TRIMMING DIAMETER (MM) | 350 |
---|---|
CUTTING DIAMETER (MM) | 400 |
DELIMBING CYLINDER STROKE (MM) | 400 |
ROTATION ANGLE (o) | 400 |
TORQUE (NM) | 400 |
SAWCHAIN (“) | 400 |
SAW (“) | 400 |
WEIGHT (KG) | 400 |
RECOMMENDED OIL FLOW RATE (L/MIN) | 400 |
RECOMMENDED WORKING PRESSURE | 400 |
RECOMMENDED INPUT POWER | 400 |
Further details about the product
Tractor Forestry Processor Kesla LF40
The forestry processor Kesla 40LF is fixed to a three-point tractor suspension (or to a wood forwarder). It is suitable for quick handling of logs, for delimbing and cutting to specific lengths. The specified processor is also fit for the preparation of firewood.
Stroke Harvester Heads Naarva
A COMPLETE CATALOGUE OF HEADS | HERE |
---|
Further details about the product
Stroke Harvester Heads Naarva
The stroke harvester heads Naarva are designed to be fixed in the place of a grab-loader. It is able to cut down, cut and load trees. A major part does not require any additional hydraulics or electric installation. The sequence valves automatically control cutting and tilting. The cutting guillotine is maintenance-free. The only required maintenance is the lubrication of pins.
Cumulative Guillotine Heads Naarva
A COMPLETE CATALOGUE OF HEADS | HERE |
---|
Further details about the product
Cumulative Guillotine Heads Naarva
The cumulative heads Naarva are designed to be attached to the place of a grab-loader. It is able to cut down, cut and load trees. A major part does not require any additional hydraulics or electric installation. The sequence valves automatically control cutting and tilting. The cutting guillotine is maintenance-free. The only required maintenance is the lubrication of pins.
Felling Guillotine Heads Naarva
A COMPLETE CATALOGUE OF HEADS | HERE |
---|
Further details about the product
Felling Guillotine Heads Naarva
The felling head Naarva is designed to be attached to the place of a grab-loader. It is able to cut down, cut and load trees. A major part does not require any additional hydraulics or electric installation. The sequence valves automatically control cutting and tilting. The cutting guillotine is maintenance-free. The only required maintenance is the lubrication of pins.
Tractor Processor NIAB 5-15B
MACHINE HEIGHT (MM) |
2 300 |
MACHINE WIDTH (MM) |
2 450 |
MACHINE LENGTH (MM) |
2 000 |
WEIGHT (KG) |
1 050 |
CHAINSAW BAR (“) |
18 |
CUTTING POWER (kW) |
18 |
TOW ROPE LENGTH (M) |
4 |
TOW ROPE DIAMETER (MM) |
8 |
MAXIMUM PULLING POWER (T) |
2,5 |
MAXIMUM LOG DIAMETER (MM) |
500 |
TRIMMING PRESSURE (MPA/BAR) |
11/110 |
HYDRAULIC OIL FLOW RATE (L/MIN) |
60 |
MINIMUM REQUIRED POWER (kW) |
30 |
EL POWER (V/A) |
12/6 |
Further details about the product
Tractor Processor NIAB 5-15B
NIAB 5-15B is a tractor processor designed primarily to trim and reduction of thinning material to specified assortments. The measuring unit of this type NIAB 5-15B provides precise length measurement of the processed product range. Upon request, these processors can also be equipped with diameter measurement.
Forestry Winch Uniforest 55H
PULLING FORCE (kN) | 55 |
---|---|
WINDING SPEED (m/s) | 0,6 |
ROPE LENGTH AND DIAMETER (mm) | 70/11 |
RECOMMENDED TRACTOR POWER (kW) | 40-55 |
DIMENSION A | 1 590 |
DIMENSION B | 490 |
DIMENSION C | 1 480 |
DIMENSION D | 2 300 |
WEIGHT WITHOUT A ROPE (kg) | 409 |
CONTROL | H |
A COMPLETE CATALOGUE OF UNIFOREST | HERE |
Further details about the product
Forestry Winch Uniforest 55H
Forestry Winch Uniforest 65H
PULLING FORCE (kN) | 65 |
---|---|
WINDING SPEED (m/s) | 0,6 |
ROPE LENGTH AND DIAMETER (mm) | 80/12 |
RECOMMENDED TRACTOR POWER (kW) | 45-70 |
DIMENSION A | 1 685 |
DIMENSION B | 750 |
DIMENSION C | 1 800 |
DIMENSION D | 2 300 |
WEIGHT WITHOUT A ROPE (kg) | 564 |
CONTROL | H |
A COMPLETE CATALOGUE OF UNIFOREST | HERE |
Further details about the product
Forestry Winch Uniforest 65H
Forestry Winch Uniforest 45H
PULLING FORCE (kN) | 45 |
---|---|
WINDING SPEED (m/s) | 0,6 |
ROPE LENGTH AND DIAMETER (mm) | 70/10 |
RECOMMENDED TRACTOR POWER (kW) | 37-50 |
DIMENSION A | 1 490 |
DIMENSION B | 490 |
DIMENSION C | 1 400 |
DIMENSION D | 2 170 |
WEIGHT WITHOUT A ROPE (kg) | 395 |
CONTROL | H |
A COMPLETE CATALOGUE OF UNIFOREST | HERE |
Further details about the product
Forestry Winch Uniforest 45H
Forestry Winch Uniforest 50eco
PULLING FORCE (kN) | 50 |
---|---|
WINDING SPEED (m/s) | 0,9 |
ROPE LENGTH AND DIAMETER (mm) | 60/11 |
RECOMMENDED TRACTOR POWER (kW) | 22-40 |
DIMENSION A | 1 400 |
DIMENSION B | 480 |
DIMENSION C | 1 315 |
DIMENSION D | 2 000 |
WEIGHT WITHOUT A ROPE (kg) | 303 |
CONTROL | M |
A COMPLETE CATALOGUE OF UNIFOREST | HERE |
Further details about the product
Forestry Winch Uniforest 50eco
Forestry Winch Uniforest 40eco
PULLING FORCE (kN) | 40 |
---|---|
WINDING SPEED (m/s) | 0,9 |
ROPE LENGTH AND DIAMETER (mm) | 60/11 |
RECOMMENDED TRACTOR POWER (kW) | 11-33 |
DIMENSION A | 1 375 |
DIMENSION B | 450 |
DIMENSION C | 1 160 |
DIMENSION D | 2 000 |
WEIGHT WITHOUT A ROPE (kg) | 229 |
CONTROL | M |
A COMPLETE CATALOGUE OF UNIFOREST | HERE |
Further details about the product
Forestry Winch Uniforest 40eco
Forestry Winch Uniforest 85M
PULLING FORCE (kN) | 85 |
---|---|
WINDING SPEED (m/s) | 0,6 |
ROPE LENGTH AND DIAMETER (mm) | 90/13 |
RECOMMENDED TRACTOR POWER (kW) | min 50 |
DIMENSION A | 1 800 |
DIMENSION B | 780 |
DIMENSION C | 1 800 |
DIMENSION D | 2 300 |
WEIGHT WITHOUT A ROPE (kg) | 571 |
CONTROL | M |
A COMPLETE CATALOGUE OF UNIFOREST | HERE |
Further details about the product
Forestry Winch Uniforest 85M
Forestry Winch Uniforest 55M
PULLING FORCE (kN) | 55 |
---|---|
WINDING SPEED (m/s) | 0,9 |
ROPE LENGTH AND DIAMETER (mm) | 70/11 |
RECOMMENDED TRACTOR POWER (kW) | 40-55 |
DIMENSION A | 1 590 |
DIMENSION B | 490 |
DIMENSION C | 1 480 |
DIMENSION D | 2 300 |
WEIGHT WITHOUT A ROPE (kg) | 375 |
CONTROL | M |
A COMPLETE CATALOGUE OF UNIFOREST | HERE |
Further details about the product
Forestry Winch Uniforest 55M
Forestry Winch Uniforest 45M
PULLING FORCE (kN) | 45 |
---|---|
WINDING SPEED (m/s) | 0,9 |
ROPE LENGTH AND DIAMETER (mm) | 70/10 |
RECOMMENDED TRACTOR POWER (kW) | 37-50 |
DIMENSION A | 1 490 |
DIMENSION B | 490 |
DIMENSION C | 1 400 |
DIMENSION D | 2 170 |
WEIGHT WITHOUT A ROPE (kg) | 361 |
CONTROL | M |
A COMPLETE CATALOGUE OF UNIFOREST | HERE |
Further details about the product
Forestry Winch Uniforest 45M
Forestry Winch Uniforest 35M
PULLING FORCE (kN) | 35 |
---|---|
WINDING SPEED (m/s) | 0,9 |
ROPE LENGTH AND DIAMETER (mm) | 70/10 |
RECOMMENDED TRACTOR POWER (kW) | 11-33 |
DIMENSION A | 1 200 |
DIMENSION B | 450 |
DIMENSION C | 1 160 |
DIMENSION D | 2 000 |
WEIGHT WITHOUT A ROPE (kg) | 232 |
CONTROL | M |
A COMPLETE CATALOGUE OF UNIFOREST | HERE |
Further details about the product
Forestry Winch Uniforest 35M
Forestry Winch Uniforest 30M
PULLING FORCE (kN) | 30 |
---|---|
WINDING SPEED (m/s) | 0,85 |
ROPE LENGTH AND DIAMETER (mm) | 50/10 |
RECOMMENDED TRACTOR POWER (kW) | 11-25 |
DIMENSION A | 1 000 |
DIMENSION B | 420 |
DIMENSION C | 1 060 |
DIMENSION D | 2 000 |
WEIGHT WITHOUT A ROPE (kg) | 180 |
CONTROL | M |
A COMPLETE CATALOGUE OF UNIFOREST | HERE |
Further details about the product
Forestry Winch Uniforest 30M
Tilting Saw HMG Hess WS
MOTOR POWER (kW) | 5,5 - 10 |
---|---|
Speed(1/min) | 1 450 |
CUT DEPTH (mm) | 260 |
WHEEL DIAMETER (mm) | 700 |
WEIGHT (kg) | 119 |
A COMPLETE CATALOGUE OF HMG HESS | HERE |
Further details about the product
Tilting Saw HMG Hess WS
Tilting circular saws with direct drive by an electric motor (5.5 kW, 7.5 kW and 10 kW) are basic models of the production series of high-quality circular saws HMG. They feature not only a robust and solid design, but also a high degree of safety. The saw can be readily equipped with a work table. Moreover, the saw design also allows a later drive change (driving from the output shaft of the tractor).
Tilting Saw HMG Hess RS
MOTOR POWER (kW) | 5,5 - 10 |
---|---|
Speed(1/min) | 1 450 |
WHEEL DIAMETER (mm) | 700 |
WEIGHT (kg) | 130 |
TABLE DIMENSIONS (mm) | 1 300 x 820 |
CUTTING HEIGHT ON THE TABLE (mm) | 240 |
A COMPLETE CATALOGUE OF HMG HESS | HERE |
Further details about the product
Tilting Saw HMG Hess RS
The saws HMG with sliding tables feature a table with smooth operation seated on ball bearings. The cutting height of up to 240 mm. A stable work table. The circular-saw blade can be changed readily thanks to a hinged table and blade tightening cover. The option of electric motor driving (5.5 kW, 7.5 kW and 10 kW) and the drive from the tractor output shaft.
Tilting Saw HMG Hess WTSK
MOTOR POWER (kW) | 7,5 - 10 |
---|---|
Speed(1/min) | 1 680 |
CUT DEPTH (mm) | 280 |
WHEEL DIAMETER (mm) | 700 |
WEIGHT (kg) | 202 |
TABLE DIMENSIONS (mm) | 1 290 x 850 |
CUTTING HEIGHT ON THE TABLE (mm) | 210 |
A COMPLETE CATALOGUE OF HMG HESS | HERE |
Further details about the product
Tilting Saw HMG Hess WTSK
A combined tilting circular saw with a table and a direct drive by an electric motor (7.5 kW and 10 kW) through a V-belt features versatile use. In several seconds, the saw can be changed from firewood cutting in the cradle to the longitudinal or cross cutting on the table. This saw also allows a later change to driving (the drive from the output shaft of the tractor). The saws are all delivered ready-to-use.
Tilting Saw HMG Hess WTS
MOTOR POWER (kW) | 5,5 - 10 |
---|---|
Speed(1/min) | 1 450 |
CUT DEPTH (mm) | 260 |
WHEEL DIAMETER (mm) | 700 |
WEIGHT (kg) | 119 |
TABLE DIMENSIONS (mm) | 1 290 x 850 |
CUTTING HEIGHT ON THE TABLE (mm) | 210 |
A COMPLETE CATALOGUE OF HMG HESS | HERE |
Further details about the product
Tilting Saw HMG Hess WTS
A combined tilting circular saw with a table and a direct drive by an electric motor (5.5 kW, 7.5 kW and 10 kW) features versatile use. In several seconds, the saw can be changed from firewood cutting in the cradle to the longitudinal or cross cutting on the table. This saw also allows a later change to driving (the drive from the output shaft of the tractor). The saws are all delivered ready-to-use.
Tilting Saw HMG Hess WSK
MOTOR POWER (kW) | 7,5 - 10 |
---|---|
SPEED(1/min) | 1 680 |
CUT DEPTH (mm) | 280 |
WHEEL DIAMETER (mm) | 700 |
WEIGHT (kg) | 151 |
A COMPLETE CATALOGUE OF HMG HESS | HERE |
Further details about the product
Tilting Saw HMG Hess WSK
Tilting circular saws driven by an electric motor (7.5 kW and 10 kW) through a V-belt have an advantage consisting in the longer life of the electric motor, they feature higher speed and allow for greater cutting depth. Their equipment includes a closed safeguard of a wheel and all driving elements. The saw can be readily equipped with a work table. The saw design also allows a later drive change (driving from the output shaft of the tractor).
HMG Hess HSP 10 tones
MOTOR POWER (kW/V) | 3,6/400 |
---|---|
SPLITTING POWER (T) | 10 |
MAX. WOOD HEIGHT (mm) | 1 110 |
STROKE (mm) | 1 000 |
WEIGHT (kg) | 226 |
WORK MOVEMENT SPEED - FIRST LEVEL (cm/s) | 10 |
WORK MOVEMENT SPEED - SECOND LEVEL (cm/s) | 20 |
BACK MOVEMENT SPEED (cm/s) | 20 |
A COMPLETE CATALOGUE OF HMG HESS | HERE |
Further details about the product
The hydraulic wood splitter HMG Hess HSP 10 tons for short as well as meter-long wood (up to 111 cm).
Drive - the following can be chosen: electric motor, power take-off shaft, tractor hydraulics, a combination of these drives. Can be complemented at any time.
This series of splitters use a newly-developed two-hand safety control, which holds the wood on the upper side and which gives continuous control over the stability. It also provides the possibility of adjusting the position of wood to be split. Series-delivered side arms are designed to catch the split wood and to put off the parts intended for further splitting. The basic design of the machine provides 2-speed splitting, brass slideway of a splitting wedge, oil back filtration, traveling wheels, three-point mount, quick arrest of work cylinder in the working and in the transport positions, a continuously adjustable range of operating positions.
HMG Hess HSP 13 tones
MOTOR POWER (kW/V) | 5,2/400 |
---|---|
SPLITTING POWER (T) | 13 |
MAX. WOOD HEIGHT (mm) | 1 100 |
STROKE (mm) | 1 000 |
WEIGHT (kg) | 301 |
WORK MOVEMENT SPEED - FIRST LEVEL (cm/s) | 8 |
WORK MOVEMENT SPEED - SECOND LEVEL (cm/s) | 18 |
BACK MOVEMENT SPEED (cm/s) | 12 |
A COMPLETE CATALOGUE OF HMG HESS | HERE |
Further details about the product
The hydraulic wood splitter HMG Hess HSP 13 tons for short as well as meter-long wood (up to 111 cm).
Drive - the following can be chosen: electric motor, power take-off shaft, tractor hydraulics, a combination of these drives. Can be complemented at any time.
This series of splitters use a newly-developed two-hand safety control, which holds the wood on the upper side and which gives continuous control over the stability. It also provides the possibility of adjusting the position of wood to be split. Series-delivered side arms are designed to catch the split wood and to put off the parts intended for further splitting. The basic design of the machine provides 2-speed splitting, brass slideway of a splitting wedge, oil back filtration, traveling wheels, three-point mount, quick arrest of work cylinder in the working and in the transport positions, a continuously adjustable range of operating positions.
HMG Hess HSP 24 tones
MOTOR POWER (kW/V) | 6,5/400 |
---|---|
SPLITTING POWER (T) | 24 |
MAX. WOOD HEIGHT (mm) | 1 110 |
STROKE (mm) | 1 000 |
WEIGHT (kg) | 480 |
WORK MOVEMENT SPEED - FIRST LEVEL (cm/s) | 7 |
WORK MOVEMENT SPEED - SECOND LEVEL (cm/s) | 17 |
BACK MOVEMENT SPEED (cm/s) | 10 |
A COMPLETE CATALOGUE OF HMG HESS | HERE |
Further details about the product
The hydraulic wood splitter HMG Hess HSP 24 tons for short as well as meter-long wood (up to 111 cm).
Drive - the following can be chosen: electric motor, power take-off shaft, tractor hydraulics, a combination of these drives. Can be complemented at any time.
This series of splitters use a newly-developed two-hand safety control, which holds the wood on the upper side and which gives continuous control over the stability. It also provides the possibility of adjusting the position of wood to be split. Series-delivered side arms are designed to catch the split wood and to put off the parts intended for further splitting. The basic design of the machine provides 2-speed splitting, brass slideway of a splitting wedge, oil back filtration, traveling wheels, three-point mount, quick arrest of work cylinder in the working and in the transport positions, a continuously adjustable range of operating positions.
HMG Hess HSP 20 tones
MOTOR POWER (kW/V) | 6,5/400 |
---|---|
SPLITTING POWER (T) | 20 |
MAX. WOOD HEIGHT (mm) | 1 110 |
STROKE (mm) | 1 000 |
WEIGHT (kg) | 395 |
WORK MOVEMENT SPEED - FIRST LEVEL (cm/s) | 7 |
WORK MOVEMENT SPEED - SECOND LEVEL (cm/s) | 17 |
BACK MOVEMENT SPEED (cm/s) | 10 |
A COMPLETE CATALOGUE OF HMG HESS | HERE |
Further details about the product
The hydraulic wood splitter HMG Hess HSP 20 tons for short as well as meter-long wood (up to 111 cm).
Drive - the following can be chosen: electric motor, power take-off shaft, tractor hydraulics, a combination of these drives. Can be complemented at any time.
This series of splitters use a newly-developed two-hand safety control, which holds the wood on the upper side and which gives continuous control over the stability. It also provides the possibility of adjusting the position of wood to be split. Series-delivered side arms are designed to catch the split wood and to put off the parts intended for further splitting. The basic design of the machine provides 2-speed splitting, brass slideway of a splitting wedge, oil back filtration, traveling wheels, three-point mount, quick arrest of work cylinder in the working and in the transport positions, a continuously adjustable range of operating positions.
HMG Hess HSP 18 tones
MOTOR POWER (kW/V) | 6,5/400 |
---|---|
SPLITTING POWER (T) | 18 |
MAX. WOOD HEIGHT (mm) | 1 240 |
STROKE (mm) | 1 000 |
WEIGHT (kg) | 341 |
WORK MOVEMENT SPEED - FIRST LEVEL (cm/s) | 7 |
WORK MOVEMENT SPEED - SECOND LEVEL (cm/s) | 17 |
BACK MOVEMENT SPEED (cm/s) | 10 |
A COMPLETE CATALOGUE OF HMG HESS | HERE |
Further details about the product
The hydraulic wood splitter HMG Hess HSP 18 tons for short as well as meter-long wood (up to 124 cm).
Drive - the following can be chosen: electric motor, power take-off shaft, tractor hydraulics, a combination of these drives. Can be complemented at any time.
This series of splitters use a newly-developed two-hand safety control, which holds the wood on the upper side and which gives continuous control over the stability. It also provides the possibility of adjusting the position of wood to be split. Series-delivered side arms are designed to catch the split wood and to put off the parts intended for further splitting. The basic design of the machine provides 2-speed splitting, brass slideway of a splitting wedge, oil back filtration, traveling wheels, three-point mount, quick arrest of work cylinder in the working and in the transport positions, a continuously adjustable range of operating positions.
HMG Hess HSP 16 tones
MOTOR POWER (kW/V) | 5,2/400 |
---|---|
SPLITTING POWER (T) | 16 |
MAX. WOOD HEIGHT (mm) | 1 110 |
STROKE (mm) | 1 000 |
WEIGHT (kg) | 316 |
WORK MOVEMENT SPEED - FIRST LEVEL (cm/s) | 7 |
WORK MOVEMENT SPEED - SECOND LEVEL (cm/s) | 17 |
BACK MOVEMENT SPEED (cm/s) | 10 |
A COMPLETE CATALOGUE OF HMG HESS | HERE |
Further details about the product
The hydraulic wood splitter HMG Hess HSP 16 tons for short as well as meter-long wood (up to 111 cm).
Drive - the following can be chosen: electric motor, power take-off shaft, tractor hydraulics, a combination of these drives. Can be complemented at any time.
This series of splitters use a newly-developed two-hand safety control, which holds the wood on the upper side and which gives continuous control over the stability. It also provides the possibility of adjusting the position of wood to be split. Series-delivered side arms are designed to catch the split wood and to put off the parts intended for further splitting. The basic design of the machine provides 2-speed splitting, brass slideway of a splitting wedge, oil back filtration, traveling wheels, three-point mount, quick arrest of work cylinder in the working and in the transport positions, a continuously adjustable range of operating positions.
Shredder Negri bio R70
THE SHREDDER SERIES R70 ARE MADE IN 5 VARIANTS |
---|
MOTORS TO SELECT: 4 PETROL MOTORS AND ONE ELECTRIC MOTOR |
A ROBUST DOUBLE ROTOR OF THE SHREDDING UNIT, 1 SPECIAL STEEL BLADE, 6 STEEL ROTARY HAMMERS, 3 EJECTION BLADES |
ADJUSTABLE OUTPUT FRACTION |
SAFETY MAGNETIC FUSE |
THE HANDLE FOR EASY HANDLING OF THE MACHINE |
THE HEIGHT OF EJECTION PIPE 650 MM |
V-BELT TRANSMISSION |
MAXIMUM DIAMETER OF SHREDDED WASTE 50 MM |
A COMPLETE CATALOGUE OF NEGRI BIO HERE |
Further details about the product
Garden Shredder Negri Bio R70
They are designed to shred organic waste, for example leaves, branches, bushes, hedges, trees and other timber species of various hardness. They are fit for professional use, industrial customers, municipalities, composting plants and households. The shredders Negri bio are all made exclusively in Europe - they consist of European and Japanese components (motors: Honda, Robin Subaru, Kubota). Thus the high quality and immediate availability of spare parts are secured.Shredder Negri bio R95
THE SHREDDER SERIES R95 ARE MADE IN 9 VARIANTS |
---|
MOTORS TO SELECT: SIX PETROL MOTORS, TWO ELECTRIC MOTORS AND ONE TRACTOR MOTOR |
A ROBUST DOUBLE ROTOR OF THE SHREDDING UNIT, MADE IN TWO VARIANTS: 1 SPECIAL STEEL BLADE, 8 STEEL ROTARY HAMMERS, 4 EJECTION BLADES OR 2 SPECIAL STEEL BLADES, 8 ROTARY HAMMERS, 4 EJECTION BLADES FOR THE MOTORS 9HP |
ADJUSTABLE OUTPUT FRACTION |
SAFETY MAGNETIC FUSE |
THE HANDLE FOR EASY HANDLING OF THE MACHINE |
THE HEIGHT OF EJECTION PIPE 1160 MM |
V-BELT TRANSMISSION |
MAXIMUM DIAMETER OF SHREDDED WASTE 70 MM |
A COMPLETE CATALOGUE OF NEGRI BIO HERE |
Further details about the product
Garden Shredder Negri Bio R95
They are designed to shred organic waste, for example leaves, branches, bushes, hedges, trees and other timber species of various hardness. They are fit for professional use, industrial customers, municipalities, composting plants and households. The shredders Negri bio are all made exclusively in Europe - they consist of European and Japanese components (motors: Honda, Robin Subaru, Kubota). Thus the high quality and immediate availability of spare parts are secured.Shredder Negri bio R185
THE SHREDDER SERIES R130 ARE MADE IN 13 VARIANTS |
---|
MOTORS TO SELECT: NINE PETROL MOTORS, TWO TRACTOR MOTORS AND TWO ELECTRIC MOTORS. |
ROBUST DOUBLE ROTOR OF THE SHREDDING UNIT, 2 SPECIAL STEEL BLADES, 1 SPECIAL ADJUSTABLE COUNTER-BLADE, 10 STEEL ROTARY HAMMERS. |
THE MODELS MARKED RI ARE EQUIPPED WITH A HYDRAULIC-CONTROLLED FEED CYLINDER WITH ADJUSTABLE SPEED AND BACK MOTION. |
THE SHREDDER R185BHHP13AERIN WITH A MOTOR GX390 WITH ELECTRIC STARTING IS EQUIPPED WITH THE SYSTEM NOSTRESS |
THE HEIGHT OF EJECTION PIPE 1700 MM |
ROTARY PIPE - BY 270° |
THE BELT TRANSMISSION WITH AN IDLER PULLEY FOR THE MOTOR VERSION, A FLEXIBLE CLUTCH FOR THE TRACTOR VERSION |
MAXIMUM DIAMETER OF SHREDDED WASTE 90 MM |
A COMPLETE CATALOGUE OF NEGRI BIO HERE |
Further details about the product
Garden Shredder Negri Bio R185
They are designed to shred organic waste, for example leaves, branches, bushes, hedges, trees and other timber species of various hardness. They are fit for professional use, industrial customers, municipalities, composting plants and households. The shredders Negri bio are all made exclusively in Europe - they consist of European and Japanese components (motors: Honda, Robin Subaru, Kubota). Thus the high quality and immediate availability of spare parts are secured.Shredder Negri bio R130
THE SHREDDER SERIES R130 ARE MADE IN 10 VARIANTS |
---|
MOTORS TO SELECT: SIX PETROL MOTORS, TWO ELECTRIC MOTORS, ONE TRACTOR MOTOR AND ONE FOR A DRIVE UNIT |
ROBUST DOUBLE ROTOR OF THE SHREDDING UNIT, 2 SPECIAL STEEL BLADES, 22 STEEL ROTARY HAMMERS |
TWO HOPPERS |
OUTPUT FRACTION ADJUSTABLE SCREEN |
THE HANDLE FOR EASY HANDLING OF THE MACHINE |
THE HEIGHT OF EJECTION PIPE 1160 MM |
V-BELT TRANSMISSION, CENTRIFUGAL CLUTCH FOR THE PETROL VERSIONS, FLEXIBLE CLUTCH FOR R130T |
MAXIMUM DIAMETER OF SHREDDED WASTE 65 MM |
A COMPLETE CATALOGUE OF NEGRI BIO HERE |
Further details about the product
Garden Shredder Negri Bio R130
They are designed to shred organic waste, for example leaves, branches, bushes, hedges, trees and other timber species of various hardness. They are fit for professional use, industrial customers, municipalities, composting plants and households. The shredders Negri bio are all made exclusively in Europe - they consist of European and Japanese components (motors: Honda, Robin Subaru, Kubota). Thus the high quality and immediate availability of spare parts are secured.Forestry Tractors STEYR
THE COMPLETE CATALOGUE OF FORESTRY TRACTORS STEYR HERE |
---|
Further details about the product
Forestry Tractors STEYR
The factory forestry program of the brand STEYR has a long-standing history. In Austria, Steyr tractors are the most widespread brand in forestry. Directly in factory, you can be completely prepared for the tough work in the woods. Forestry modifications apply to all model ranges from 55 to 269 HP.
Write to us or call
+420 388 302 170
STS Prachatice, a.s.
Těšovice 62
384 21 Husinec
CRN: 608 26 983
VAT Reg. No.: CZ60826983
GPS:
49°2'41.26"N, 14°1'19.433"E
PHONE:
+420 388 302 170; +420 602 458 358
FAX: +420 388 312 042
E-MAIL: obchod@stsprachatice.cz